• chamois leather gloves
Cast Iron 90 Degree Elbow vs Reducing Hexagon Nipple: Which Fitting Fits the Joint?
Dated on Nov-17-2026
THE BUYER BULLETINSIDE BY SIDE

The 90° reducing elbow changes flow direction between different-size pipes, while the reducing hexagon nipple joins different-size pipes in a straight run. Both use malleable cast iron and share the same listed thread, pressure, strength, and coating values.

Cast Iron 90 Degree Elbow vs Reducing Hexagon Nipple: Which Fitting Fits the Joint?
Illustration for reference; see the product page for actual photos and specifications.

At a glance

Connection function and geometry

Material

Thread type

Working pressure

Tensile strength

A cast iron 90 degree elbow and a reducing hexagon nipple solve different connection problems. Choose the 90° reducing elbow when the line must turn between two pipe sizes. Choose the reducing hexagon nipple when the line should continue straight while transitioning between sizes.

The two fittings serve different layouts

The 90° Reducing Elbow Beaded Malleable Cast Iron connects two different-size pipes by threaded connection and turns the pipeline 90 degrees. It is the fitting for a direction change at a corner, offset, or branch layout.

The Beaded Reducing Hexagon Nipple Malleable Cast Iron has male threads at both ends and joins two different-size pipes through a middle hexagonal body. Its straight connection suits a size transition where no change in direction is required.

Side-by-side comparison

Criterion90° Reducing Elbow Beaded Malleable Cast IronBeaded Reducing Hexagon Nipple Malleable Cast Iron
Primary connectionJoins different-size pipes and turns flow 90 degreesJoins different-size pipes with male threads at both ends
MaterialMalleable cast iron, BS EN 1562, EN-GJMB-350-10Malleable cast iron, BS EN 1562, EN-GJMB-350-10
ThreadBSPT / NPTBSPT / NPT
Working pressure20 ~ 25 bar, ≤PN2520 ~ 25 bar, ≤PN25
Tensile strength300 MPA (Minimum)300 MPA (Minimum)
Elongation6% Minimum6% Minimum
SurfaceBlack iron / hot dip galvanizedBlack iron / hot dip galvanized
Zinc coatingAverage 70 um, each fitting ≥63 umAverage 70 um, each fitting ≥63 um
Listed standardISO49 / EN 10242, symbol CISO49 / EN 10242, symbol C

The shared material and performance figures make the connection geometry the main purchasing distinction. The elbow changes direction, while the nipple provides a straight, male-threaded size transition.

Size and weight differences

Both fittings cover reducing connections, but their listed size combinations and weights differ. The elbow list runs from 3/4 X 1/2 through 2 X 1-1/2. The nipple list runs from 3/4 X 3/8 through 2 X 1-1/2, with more listed combinations in the smaller end sizes.

FittingExample listed sizeListed weight
90° reducing elbow3/4 X 1/20.116 KG
90° reducing elbow2 X 1-1/20.651 KG
Reducing hexagon nipple3/4 X 3/80.097 KG
Reducing hexagon nipple2 X 1-1/20.46 KG

Use the exact item number and size combination when checking a quotation. For example, the elbow list identifies ERL0705 for 3/4 X 1/2 and ERL2015 for 2 X 1-1/2. The nipple list identifies ENIR0703 for 3/4 X 3/8 and ENIR2015 for 2 X 1-1/2.

The 90° reducing elbow suits buyers routing different-size pipes through a 90-degree turn. The reducing hexagon nipple suits buyers making a straight, different-size connection with male threads at both ends.

The two options

90° Reducing Elbow Beaded Malleable Cast Iron

Beaded Reducing Hexagon Nipple Malleable Cast Iron

Which one should you choose?

Pick the 90° reducing elbow when the installation needs a 90-degree flow-direction change and the two connected pipes have different sizes. Its beaded ends and BSPT / NPT thread listing should be matched to the pipe connection plan.

Pick the reducing hexagon nipple when two different-size pipes need a straight connection and both sides require male threads. Check the size pair, item number, and fitting weight against the order schedule before purchase.

For either option, confirm that the selected finish matches the installation requirement. Both listings identify black iron and hot dip galvanized surfaces, with an average zinc coating of 70 um and each fitting at least 63 um for the zinc-coated finish.

The company

Langfang Pannext Pipe Fitting Co., Ltd.

Langfang Pannext Pipe Fitting Co., Ltd. is a Sino-US joint venture, which is specialized in the production of malleable iron pipe fittings and bronze pipe fittings. PanNext has been founded in 1993 with over 366,000 square feet of facility area. It is located in Langfang City, Hebei Province - known as the Pearl on the Beijing-Tianjin Corridor,which is very convenient by land, sea and air transportation. With +30years’ R&D experiences,there are more than 350 employees working in PanNext.…

About Us ↗Visit company website ↗

Post time: Nov-17-2026
Prev:

This is the first article

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.