What material is used for this fitting?

The fitting is made using ASTM B62, UNS Alloy C83600 and ASTM B824 C89633 material specifications. Cast bronze is used in water supply and drainage pipelines, pumps, valves and maritime equipment, and it has corrosion resistance in fresh water, salt water, alkaline solutions and heated steam.

What sizes are available?

The listed sizes are 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 and 4 inches. The product table also gives dimensions for each size. For example, the 1/2-inch L4505 has dimensions A 0.78 and B 0.45, while the 2-inch L4520 has dimensions A 1.45 and B 0.75. Match the selected size and dimensional envelope to the connected pipe layout before ordering.

Which thread standard does the 45 degree elbow use?

The threaded connection uses NPT threads conforming to ASME B1.20.1. Confirm that the mating pipe or fitting uses the compatible thread type and size for the intended water pipe connection.

What dimensional class applies to this fitting?

The fitting dimensions conform to ASME B16.15 Class 125. This classification should be considered together with the requirements of the complete piping system and the applicable conditions of use.

Is each fitting pressure tested?

Each fitting is subjected to a 100% water pressure test before it enters the warehouse. Threading is checked during production with gages, and the finished packaging is checked against the order.

How is the fitting packaged?

Export packaging uses a master carton with inner boxes. The master carton is made with five-layer corrugated paper. Case quantities vary by size: the listed master case quantity is 600 pieces for 1/8 inch, 200 pieces for 1/2 inch, 25 pieces for 2 inches, and 4 pieces for 4 inches. Confirm the required size mix and packing quantity when placing an order.

Can buyers request samples?

Yes. Samples can be provided free from the factory. State the required size and quantity when requesting a sample so the correct 45 degree elbow pipe fitting can be prepared.

What payment terms are supported?

The listed payment terms are T/T or L/C. The stated arrangement is 30% payment in advance and the remaining 70% balance before shipment.

What is the stated delivery time?

The stated delivery time is 35 days after receipt of the advance payment. Confirm the timing for the specific order, size mix and destination before finalizing a purchase.

Is a product guarantee listed?

A minimum one-year guarantee is listed for the product. Confirm the applicable terms for the specific order and market in the quotation or sales contract.

For a quotation, send the required fitting size, quantity, destination and any packaging requirements so the order can be matched to the correct item number and case quantity.